Are you looking for:

Scorpion Jack TJ12 Stationary 25,000 lb. capacity Truck Jack

The Scorpion Installed In-Ground lift is semi-recessed in your shop floor. This is a semi-inground installation is an ideal solution for those shops that perform a lot of tire service and Brake Service. This is an installed version of the ScorpionTJ12 service jack and it offers a perfect combination of speed, efficiency, ease of use and value. The Scorpion Installed lifts are much less expensive than your standard above- ground options or for that matter the in-ground options too.


These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi). So you lift the whole front end or axle assembly in one go. There is a tire spotting dish for quick set up, and a remote control to allow the operator to check the load.


There is a built in lock for safety and other convenience features.


The lifts come with a control station housing the pump unit and a 20 Ft. Remote control so the operator can spot the load.


Features:

  • 25,000 Lb capacity
  • Dual hydraulic rams for lifting
  • Lift over 20" with a built in safety lock
  • Lift across the axle with the lifting saddles or lift on the frame
  • Heavy-duty hydraulics and air motor

  • Choose between:

  • Above Ground install - 8" Driver Over Height
  • Semi In-Ground install - 4.25" Drive Over Height
  • In-Ground Install - Flush mount with 0" Driver Over Height
  • Branick Model 2260 6-Bar Heavy Duty Truck Inflation Cage

    The 2260 was designed with a flat-top design that was engineered to handle extra bars, making this a six bar cage. It can handle tires with a maximum width of 29" (cross section) and maximum diameter of 59". Combine the No-Mar cage with our BlockHead Auto Inflator, both of which can handle run-flat and high pressure tires, to create a more efficient and safer environment for your workers.

    All Branick inflation cages meet or exceed the requirements of the O.S.H.A. Standard No. 29 CFR Part 1910.177.

    25 Gal Self-Evacuating Oil Drain with "Big Mouth" Trans Drain Pan

    The "Big Mouth" Transmission Drain Pan is designed for long pan transmissions. It catches all of the drainage during vehicle servicing.

    • Measures: 37" L x 22" W x 7" H
    • 50% larger than most other pans
    • Made of High-Impact polyethylene plastic
    • Adapts to any drain with a 6" or larger diameter funnel

    Includes:

    • JDI-25HDC Heavy Duty Self-Evac Oil Drain 25-Gallons
    • JD-2436 Big Mouth Transmission Drain Pan
    Tow Strap With Looped Ends 4" X 30' - 40,000 lb. Capacity

    Features and Benefits:

    • Heavy duty nylon web construction with reinforced stitching and looped ends
    • Maximum load capacity: 40,000 lbs. for personal safety
    • Recommended working load should not exceed one-third of the maximum rated load
    Digital Battery and System Tester with Integrated Printer
    Features and Benefits
    • Tests 6 and 12 Volt Batteries (40 – 2000 CCA); Tests 12 Volt and 24 Volt Vehicle Starting and Charging Systems
    • Tests multiple battery types, including Conventional, Maintenance Free, AGM, Gel Cell, Marine and Deep Cycle batteries
    • Built-in printer documents battery and system test results. Printer uses standard thermal paper available from any office supply store
    • Large, adjustable backlit display provides easy viewing in bright or low light environments plus 10’ cable leads for extra-long reach
    • Reverse polarity and over-voltage protection; Packaged in a protective case for secure transport and storage
    The new Digital Battery and System Tester with Integrated Printer, offers a complete testing solution for 6 and 12 Volt batteries and 6, 12 and 24 Volt charging systems. Compatible with a wide variety of battery types, it features easy, intuitive operation with quick, accurate assessment of battery condition and starting and charging system performance. Testing is quick and easy and allows the operator to perform either a battery test, system test or both from the home screen. The tester walks through the test sequence, prompting for key pieces of information and guiding the operator from one step to the next. The tester provides accurate assessment of both charged and discharged batteries and features temperature compensation for improved accuracy. The tester’s integrated printer provides easy service documentation. The printing sequence is clear and quick, with a completed printout in just seconds. In addition, the printing stage can be easily bypassed if a printout is not necessary. The tester also incorporates a number of features that improve convenience during testing, including reverse polarity protection, extra-long cable leads reaching 10’, a fully adjustable, brightly backlit screen for clear viewing in bright or low light environments and a convenient case for safe, secure storage.
    Loading...