Are you looking for:

Swing Down Step 3-Step Single Handle w/ Adjustable Stake (Flat Black)

The Swing Down Step flatbed ladder is especially useful on flatbeds and dump trucks where easy and safe access has always been a problem. Thanks to its universal design, it can be mounted anywhere you can mount a pocket.

FEATURES & BENEFITS:

  • Built-in Grab Handle
  • 2-Way Gas Spring allows for controlled movement up and down
  • Adjustable Model fits all standard pockets
  • Can be padlocked in place
  • Approximately 39" long step section brings it close to the ground for easy access
  • Special tread design provides sure traction
  • Design allows three point contact
  • Latches securely in upright position when not in use
  • Easily moved from vehicle to vehicle
  • Easily installed on new or existing vehicles
  • Heavy Duty steel construction for long life
  • Black powder coat

NSN 2541-01-531-4064

Swing Down Step 3-Step Single Handle Solid Stake and Mounting Bracket

The Solid Stake Swing Down Step flatbed ladder is especially useful on flatbeds and dump trucks where easy and safe access has always been a problem. Thanks to its universal design, it can be mounted anywhere you can mount a pocket.


FEATURES & BENEFITS:

  • Built-in Grab Handle
  • 2-Way Gas Spring allows for controlled movement up and down
  • Can be padlocked in place
  • Approximately 39" long step section brings it close to the ground for easy access
  • Special tread design provides sure traction
  • Safety yellow powder coat finish
  • Design allows three point contact
  • Latches securely in upright position when not in use
  • Easily installed on new or existing vehicles
  • Heavy Duty steel construction for long life
  • Dump-Lok - Dump Body Safety Stand (Flat Top - 4-7/16 in Frame)

    Dump-Lok dump bed braces are an engineering breakthrough in the workplace. Dump-Lok dump bed braces safely hold dump boxes at angles higher than most manufacturer body props, giving workers safe access to more areas underneath the dump bed.

    • Sold As A Pair. Intended to be used as a pair
    • Used Universally on any brand dump box
    • Equipped with high grade, high tensile steel chains to further ensure safe repairs
    • Flat Top Model for offset frame beds and trailers
    • Fits up to 4-7/16" flange - 3-1/2 is standard

    OSHA has issued citations to employers for failing to provide lockout procedures while employees were working under the dump body of dump trucks. They have recognized the hazard of unsecured dump beds and have recommended using an alternative "truck bed brace bracket".

    • Overall Height: 21"
    • Overall Width: 6"
    • Overall Length: 12.75"
    • Maximum Capacity (pair): 50,000 lbs
    Scorpion Jack TJ12 Stationary 25,000 lb. capacity Truck Jack

    The Scorpion Installed In-Ground lift is semi-recessed in your shop floor. This is a semi-inground installation is an ideal solution for those shops that perform a lot of tire service and Brake Service. This is an installed version of the ScorpionTJ12 service jack and it offers a perfect combination of speed, efficiency, ease of use and value. The Scorpion Installed lifts are much less expensive than your standard above- ground options or for that matter the in-ground options too.


    These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi). So you lift the whole front end or axle assembly in one go. There is a tire spotting dish for quick set up, and a remote control to allow the operator to check the load.


    There is a built in lock for safety and other convenience features.


    The lifts come with a control station housing the pump unit and a 20 Ft. Remote control so the operator can spot the load.


    Features:

  • 25,000 Lb capacity
  • Dual hydraulic rams for lifting
  • Lift over 20" with a built in safety lock
  • Lift across the axle with the lifting saddles or lift on the frame
  • Heavy-duty hydraulics and air motor

  • Choose between:

  • Above Ground install - 8" Driver Over Height
  • Semi In-Ground install - 4.25" Drive Over Height
  • In-Ground Install - Flush mount with 0" Driver Over Height
  • Kiene Eaton Ultrashift DM Clutch Adapter for Clutch Caddy

    The Clutch Caddy now has a new adapter kit that can be used for the massive Eaton DM Clutch.  The adapter designed to handle the larger, deeper 182 lb clutch and includes a new splined shaft and leg extensions for better stability.

    The Clutch Caddy is designed to help the mechanic install and remove heavy 14" and 15-1/2" truck clutches in the confined drive train environment unassisted. Now one mechanic can roll a heavy clutch under the truck, and safely raise, position and install it. The Clutch Caddy is the only tool with the flexibility to do this every time.  Its exclusive clutch holder allows the clutch to swivel 360 around the base, giving it the flexibility to get the clutch past all obstacles -- under extremely cramped conditions. With available adapters it provides the shop with a unique lifting, holding and positioning device for a variety of heavy-duty tasks.

    Clutch Caddy Sold Separately

    Loading...