Use on 5-piece rims 25” to 51” with pry bar/bead loosening pockets. 4-1/4” stroke, 13.8 ton ram will break the toughest beads. Same as IMT-1800. Use with any 10,000 p.s.i pump. The kit contains the 10100 bead breaker and the following ESCO model numbers: 10592 - Pump, Air Hydraulic, 5 quart 10604 - Hose Assembly with Hose Coupler, 8'

Use on 5 piece rims 39”, 45”, 51”, 57” and 63” wheel sizes. In some cases you must first use model 10105 or 10100 bead breaker to start the movement of the rim flange. The 10103 can then be used. Model 10594 air/hydraulic pump recommended for operation. Recently redesigned to accommodate all 63” wheels. The kit includes the 10103 bead breaker and the following ESCO model numbers: 10504 - Turbo Pump II, air hydraulic, 2 gallon 10611 - 18' Hydraulic Hose 10605 - Male Coupler with female threads

Use on 5-piece rims 25” to 51” with pry bar/bead loosening pockets. 4-1/4” stroke, 13.8 ton ram will break the toughest beads. Same as IMT-1800. Use with any 10,000 p.s.i pump. The kit contains the 10100 bead breaker and the following ESCO model numbers: 10518- 1/2 Gallon Air Hydraulic Pump, 10604 - Hose Assembly with Hose Coupler, 8'

Features and Benefits:

• Fully adjustable lifting saddle with four ratchet adjustment fingers that quickly adjust to the transmission pan configuration
• Low lift height of 35” for easy transfer of transmission from jack to work bench. Maximum lift height of 75” accommodates all technicians
• Foot activated pedal raises air cylinder's ram to maximum load in seconds. Manual pump second stage quickly raises lifting saddle to desired and precise work height
• Convenient hand grip for pushing or pulling load when the load is in the lowered position
• Heavy duty nylon locking strap with ratchet fingers for securing the load to the lifting saddle

Four full swivel ball bearing mounted caster wheels for easy maneuverability. Front casters can be easily locked to prevent the jack from rolling if necessary.
Required Air Pressure 100 PSI
Low Height 35"
Raised Height 75"
Saddle Forward Tilt 37°
Saddle Backward Tilt 26°
Saddle Lateral Tilt 12° left and right
Base 30-1/4" square
Shipping Weight 145 lbs.

Engine adapter for Detroit Diesel 71 Series 6V & 8V, 92 Series 6V & 8V Engines.

A large assortment of engine mounting plates are available for mounting various makes and models of engines as well as transmissions to the KIENE engine rebuild stand. They provide simple attachment to the engine using mounting pads and holes provided by the engine manufacturer, thus emilinating, where possible, removal of accessory equipment from the engine.