Are you looking for:

Dayton & Dual Wheel Adapter for Big Truck Tire Step - (Adapter Bar Only)

The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.

This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.

The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.

Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.

*Note: This is the adapter bar only. Steps are sold separately.

Kiene Wheel Wiz Hub-Piloted Wheel Puller - With Drive Axle Socket (WW2151)

The Kiene Wheel Whiz is the proven successful way to remove seized hub-piloted wheels.

The Kiene Wheel Whiz is the original hub-piloted wheel puller used for transit buses and other heavy-duty fleet applications.

  • The Wheel Whiz quickly and safely removes seized hub-piloted wheels from steering, drive and trailer axles.
  • The Wheel Whiz uses five pulling chains to remove even the most stubborn wheels safely and allow the vehicle to be returned to service quickly.
  • The Wheel Whiz works effectively on steel or aluminum wheels.
Pulling Chain Options
  • WW2101: Steel wheels with 4" and large hand holes
  • WW2102: Aluminum wheels with 1-5/8" holes
  • WW2104: Wheels with 1-1/2" holes
  • WW2105: Supersingles
  • WW2107: Ford 350 & UPS package cars
  • WW2108: Steel wheel with 2.9" diameter holes
  • WW2109: Two hole wheels with valve stem interference
Hub Socket Options
  • WW2151: Drive Axle Socket - Fits most Eaton & Meritor(Rockwell) drive axles
  • WW2152: Mini-Bus Socket - Fits most smaller hub caps on some buses
  • WW2153: Bus Steering Axle & Euclid Trailer Socket - CR1798, Stemco 343-4176 & 343-4080 and Euclid hub caps
  • WW2154: Trailer Socket - Fits most Stemco hub caps and CR1643 & CR1743
  • WW2155: Freuhauf Trailer Socket
  • WW2156: Pro Par Trailer Socket: Fits Pro Par hub caps
JET JHJ-22-1/2L 22-1/2 Ton Low Profile Hydraulic Bottle Jack (2 Piece)

Features and Benefits:

  • For lifting, pushing, spreading, bending, pressing or straightening requirements
  • Not affected by temperature extremes
  • Electrically welded base and cylinders to assure strength and eliminate leaks
  • Pump handle included

Electrically welded base and cylinders to assure strength and eliminate leaks. Works in upright, angled or horizontal position. Complies ANSI/ASME B30-1 and PALD-1 standards.

Kiene: Adapter, Ermeto End 1/2" - 20, 20 LH(M) with 60 Degree Seat x 1/2 - 20 LH(F)
Adapter, Ermeto End 1/2" - 20, 20 LH(M) with 60 Degree Seat x 1/2 - 20 LH(F) for DT-1300 Diesel Injector Nozzle Tester
Tiger Tool Freightliner & Sterling Pin & Bushing #16-14603-000 Adapter

Freightliner & Sterling Pin & Bushing #16-14603-000 adapter for use with #15000 Pin & Bushing Service Kit.


  • Machined components are made from heat treated alloy steels for strength, durability, and extended life.
  • Black oxide finish resists corrosion.
  • Loading...