Are you looking for:

Optional Drivetrain Handler Kit for Low Profile HD Transmission Jack

The optional drivetrain handler is an accessory to the Meyer Low Profile Transmission jack #16200. It will assist the mechanic with handling awkward drive trains.

 

For its proven effectiveness in the field, the U.S. government has assigned National Stock Numbers (NSN).

16200 *NSN 4910-01-396-5044
16100 *NSN 4910-01-396-5045
16275 *NSN 2510-01-509-1903

Allison 3070  PT Transmission Adapter Available

Diamond Tread Aluminum Topsider Truck Box Series - 16" x 13" x 72"
  • Large 12" tall door opening and the recessed door frame provide easy access to spacious storage area
  • Full-length continuous hinge on doors offers a sturdy, durable and smooth performance
  • Heavy-duty steel support legs mount directly into bed floor, not into fender
  • Contractor grade diamond bright tread aluminum box
  • Thick 3" wide rubber pad protects truck side rail
  • No drilling in side rail; J-bolts fasten under bed lip
  • Stainless steel die cast T-handle compression latch with lock for security
  • Full-weather stripping keeps moisture and dust out
  • Individually boxed for shipping
  • Two doors

  • Buyers # 1701551

    H x D x W Size: 16" x 13" x 72"

    Dayton & Dual Wheel Adapter for Big Truck Tire Step - (Adapter Bar Only)

    The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.

    This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.

    The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.

    Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.

    *Note: This is the adapter bar only. Steps are sold separately.

    Jump-N-Carry 12/24 Volt Jump Starter - 3400 Peak, 850 Cranking in 12V
    Features and Benefits
    • Delivers 3400 Peak Amps of jump starting power in 12 Volt mode, and 1700 Peak Amps of jump starting power in 24 Volt mode
    • Long, 46" #2 gauge cables allow convenient positioning of the unit during jump starting, while Industrial-Grade Hot Jaw clamps penetrate battery terminal corrosion and provide maximum power transfer
    • Automatic recharging using an onboard fully automatic battery charger
    • Battery status indicator gauge
    • Assembled in the USA with US and imported components
    The versatility of 12 and 24 Volt jump starting in a single, heavy-duty unit. Dual Clore PROFORMER batteries power the JNC1224 to 3400 Peak Amps in 12 Volt mode. With an easy change between voltage settings using quick connects, and an onboard automatic charger, it is as convenient as it is powerful. Includes DC outlet to power 12 volt accessories and a 1 year limited warranty.

    Supecedes: KKJ99058
    9 Piece 1/2" Drive 6 Point Extra Thin Wall Wheel Protector Socket Set
    Features and Benefits
    • Durable outer sleeve and insert protects high polished wheels and lug nuts from damage
    • Chrome-molybdenum alloy steel for long life
    • Heavy duty blow molded case
    • Fully Guaranteed
    Set includes: SAE sizes 3/4" (light green), 13/16" (purple), 7/8" (green), 15/16" (brown), 1" (silver), 1-1/16" (black) and Metric sizes 17mm (blue), 19mm (yellow) and 21mm (red).
    Loading...