Are you looking for:

Swing Down Step 3-Step Single Handle Solid Stake and Mounting Bracket

The Solid Stake Swing Down Step flatbed ladder is especially useful on flatbeds and dump trucks where easy and safe access has always been a problem. Thanks to its universal design, it can be mounted anywhere you can mount a pocket.


FEATURES & BENEFITS:

  • Built-in Grab Handle
  • 2-Way Gas Spring allows for controlled movement up and down
  • Can be padlocked in place
  • Approximately 39" long step section brings it close to the ground for easy access
  • Special tread design provides sure traction
  • Safety yellow powder coat finish
  • Design allows three point contact
  • Latches securely in upright position when not in use
  • Easily installed on new or existing vehicles
  • Heavy Duty steel construction for long life
  • Digital Battery and Electrical System Analyzer w/Inductive Amp-Clamp

    Features and Benefits

    • Same tester platform required by International, Kenworth, Peterbilt, and Travel Centers of America – does not provide warranty code
    • Battery test routine designed for multiple-battery vehicles: pack-test up to 6 batteries in parallel without disconnecting
    • Tests 6 and 12V batteries including conventional automotive, Group 31 and other commercial batteries, AGM and Gel. Tests 12 and 24V starting and charging systems
    • Cable-drop test simultaneously calculates the voltage drop across the positive and negative sides of any circuit and total circuit drop without running engine
    • Digital multi-meter capabilities with scope and infrared temperature readings

    This outstanding new model by Midtronics starts with their most comprehensive battery and electrical systems analyzer, and adds commercial fleet capabilities. User interface and ease of use have been improved over their Micro-series products with enhanced display graphics, screen-flow and alpha-numeric keypad. Use of temperature measurement via an infrared temp-sensor and deep scan technology improve accuracy as well as decisiveness across a wider range of batteries than ever before. Displays voltage, measured CCA, battery, starting and charging system condition. SD memory card capable for record keeping, data transfer, and software upgrades. Recall last test on screen or print to optional printer.

    Drop Ship Only

    Tiger Tool Axle Shaft Puller - Medium & Heavy Duty Drive Axles

    With the Tiger Tool Axle Shaft Puller you can easily remove even the most seized axle shaft in minutes. The Tiger Tool Axle Shaft Puller works on vehicles ranging from medium-duty up to heavy-duty fitted with Dana, Eaton, or Rockwell drive axles.

    • Fully adjustable pulling arms and stud adapters are quick and easy to install
    • Includes most common 5/8" - 18 Axle stud Adapter Set; additional adapter sets also available
    • Reduces the risk of damage to axle studs

    The head of the Tiger Tool 11001 Axle Shaft Puller is rounded, ensuring the load of the hammer's force is more accurately distributed down the center of the tool. Top grade metals and various treatments safeguard the integrity of the Axle Shaft Puller, enabling it to be struck again and again.

    Optional Adapter:

    • 11010 - 1/2" - 20
    • 11015 - 9/16" - 18
    • 11020 - 3/4" - 16
    • 11025 - 1/2" - 13
    • 11030 - 5/8" - 11
    • 11035 - 5/8" - 18
    Dayton & Dual Wheel Adapter for Big Truck Tire Step - (Adapter Bar Only)

    The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.

    This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.

    The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.

    Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.

    *Note: This is the adapter bar only. Steps are sold separately.

    Diamond Tread Aluminum Topsider Truck Box Series - 16" x 13" x 72"
  • Large 12" tall door opening and the recessed door frame provide easy access to spacious storage area
  • Full-length continuous hinge on doors offers a sturdy, durable and smooth performance
  • Heavy-duty steel support legs mount directly into bed floor, not into fender
  • Contractor grade diamond bright tread aluminum box
  • Thick 3" wide rubber pad protects truck side rail
  • No drilling in side rail; J-bolts fasten under bed lip
  • Stainless steel die cast T-handle compression latch with lock for security
  • Full-weather stripping keeps moisture and dust out
  • Individually boxed for shipping
  • Two doors

  • Buyers # 1701551

    H x D x W Size: 16" x 13" x 72"

    Loading...