Product Overview
The Inner Slide Tubes
The new TRITASK Aircraft Jacks with their powder-coated Inner Slide Tubes form the “anchor” of the new TriTask System. The top of the A600 and A700 Series Inner Slide Tubes are designed to receive an AT-JPR, AT-EB or a top-of-the-jack aircraft weighing Load Cell.
The Inner Slide Tubes for the A500 Series have a built-in 1.25″ (32mm) round Jacking Point receiving socket machined into the top of its protruding anchoring stud.The AT500-CA Conversion Adapter can be mounted on the anchoring stud, which will then allow the A500 Series Inner Slide Tubes to function the same as the A600 and A700 Series Inner Slide Tubes.
Each Meyer Hydraulics Aircraft Jack comes with the Standard Inner Slide Tube. They also designed EXTENDED Inner Slide Tubes for the A622 (AT62234) and the A634 (AT63448) TriTask Jacks.
By removing the Standard Inner Slide Tube and replacing it with the Extended Tube, the user increases the base “low” jacking point of the unit.
For the older discontinued A422, A427, A434, A-5 and A-6 Aircraft Jacks, replacement Standard Inner Slide Tubes are available. The following EXTENDED Inner Slide Tube options are also available for increasing the lifting range of these jack models: AT42228 and AT42234 (for A422 and A-5), AT43454 (for A434 and A-6). The addition of the ATC-4 or ATC-8 which may be used along with these Extended Inner Slide Tubes for even greater range.