Product Overview

AT-EB Extension Bars

Twelve (12) optional 1.75″ (44mm) solid steel powder-coated Extension Bars of various lengths screw into the top of an A600 or A700 Aircraft Jack’s Inner Slide Tube or into the AT500-CA Conversion Adapter used on the A500 Series. They extend the height of the Jack 1.5″ to 12.5″ (38 to 318mm) in 1″ (25mm) increments. Both of the AT-JPR Jacking Point Receivers or a top-of-the-jack aircraft weighing Load Cell can quickly be put into the top non-threaded hole of an AT-EB Extension Bar. The AT-EB’s cannot be used on the A755C and A760A Aircraft Jacks.

A: AT-EB screwed into an AT500-CA Conversion Adapter on top of an A500 Series Inner Slide Tube

B: AT-EB with an AT-JPR in an A600 or A700 Aircraft Jack’s Inner Slide Tube

C: AT-EB015 thru AT-EB125 Extension Bars Extends the height of the TriTask Jack so technicians can get close to the airplane or helicopter without wasting valuable hydraulic lifting stroke.