Are you looking for:

Dayton & Dual Wheel Adapter for Big Truck Tire Step - (Adapter Bar Only)

The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.

This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.

The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.

Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.

*Note: This is the adapter bar only. Steps are sold separately.

5 HP 80 Gallon Vertical 2-Stage Electric Reciprocating Air Compressor

Features and Benefits:

  • Start-Stop pressure switch control
  • ASME safety valves fully enclosed belt guard
  • Tank drain and discharge valve
  • 208-230 volt, single phase
  • 2 year full warranty

No magnetic starter required. This compressor comes complete with everything you need to optimize your work and minimize down time. 18.5 cfm @100 PSI.

Jump-N-Carry 12 Volt Jump Starter - 1700 Peak Amps, 425 Cranking Amps

Features and Benefits

  • Rugged, durable and reliable 12 Volt jump starting for professional applications
  • Delivers 1700 Peak Amps, 425 cranking amps of jump starting power
  • Long, 46" #4 gauge heavy duty cables allow the unit to be positioned in the ideal location during jump starting
  • Volt gauge provides an accurate, detailed state of charge for the onboard battery
  • Built in charger will never get lost and works with any US extension cord
  • NOT compliant for California use, order SOLJNC660C instead

Trusted by professionals the world around as their go-to jump starter, the SOLJNC660, with Clore PROFORMER battery, will not disappoint. Ideal for use in a wide variety of jump starting environments, including automotive, marine and industrial – try it once and you'll see why so many technicians will accept only the JNC660. Includes a 12 volt outlet to power accessories and a Product for Life coupon that allows the end purchaser a one-time product repair for a low, fixed fee, regardless of reason for damage/problem. 1 year limited warranty.

Supercedes: KKJ990681

Optional Drivetrain Handler Kit for Low Profile HD Transmission Jack

The optional drivetrain handler is an accessory to the Meyer Low Profile Transmission jack #16200. It will assist the mechanic with handling awkward drive trains.

 

For its proven effectiveness in the field, the U.S. government has assigned National Stock Numbers (NSN).

16200 *NSN 4910-01-396-5044
16100 *NSN 4910-01-396-5045
16275 *NSN 2510-01-509-1903

Allison 3070  PT Transmission Adapter Available

Emerson Model 220 Air Jack/Safety Stand 48,000 lb Capacity (Pair)

Includes: both long and short extentions, polyurethane bonded saddle & 2 safety pins


Features:

  • 48,000 LB capacity per pair
  • 4 ton more lifting power than other brands
  • Polyurethane bonded to lifting saddles for increased safety against slipping
  • Patented, beveled piston & guide allows the ram to follow the arc of the load, giving a smoother, safer lifting and lowering action
  • Quick snap detachable handles
  • Coated cylinder inhibits rust & corrosion for longer life
  • Double air valve setup to run both jacks simultaneously is included

  • Specs:

  • Height Lowest (w/o extensions): 16"
  • Height High (w/ extensions): 54"
  • Height Long Extension (adjustable): 24"
  • Short Extension: 6
  • Ram Travel: 10"
  • Safety Pin positions: 3
  • Base Diameter: 15"
  • Capacity (single): 12 tons
  • Capacity (pair): 24 tons
  • Loading...