Are you looking for:

3/8" Flex-Head Drive Micrometer Click Wrench - 20-100 ft-lbs

Engineered, precision bearing surfaces extend the calibrated life of the M line to as many as 60,000 cycles or more and ensure the most reliable performance possible. In addition to flawless operation at release, calibration is completely external, unlike traditional mechanism that require disassembly and the replacement of blocks and shims.

  • Drive Size: 3/8"
  • Drive Type: Flex Ratchet
  • Primary Units: lb.ft
  • Capacity: 20-100
  • Increments: 0.5
  • Effective Length at 20% of Full Scale: 12.25 Effective Length at Full Scale: 11.50"
  • Maximum Overall Length: 15.00"
  • Minimum Overall Length: 14.00"
  • Weight: 2.35 lbs. (w/plastic case): 2.97 lbs.
  • Finish: Nickel / Chrome
  • Ratchet kit: R22AR-RK
  • Meets or Exceeds the following Specifications: GGG-W-686C, ANSI B107.14M
Dump-Lok - Dump Body Safety Stand (Standard Top - 4-7/16 in Frame)

Dump-Lok dump bed braces are an engineering breakthrough in the workplace. Dump-Lok dump bed braces safely hold dump boxes at angles higher than most manufacturer body props, giving workers safe access to more areas underneath the dump bed.

  • Sold As A Pair. Intended to be used as a pair
  • Used Universally on any brand dump box
  • Equipped with high grade, high tensile steel chains to further ensure safe repairs
  • Flat Top Model for offset frame beds and trailers
  • Fits up to 4-7/16" flange - 3-1/2 is standard

OSHA has issued citations to employers for failing to provide lockout procedures while employees were working under the dump body of dump trucks. They have recognized the hazard of unsecured dump beds and have recommended using an alternative "truck bed brace bracket".

  • Overall Height: 21"
  • Overall Width: 6"
  • Overall Length: 12.75"
  • Maximum Capacity (pair): 50,000 lbs
Dump-Lok - Dump Body Safety Stand (Wide Top - 6 in Frame)

Dump-Lok dump bed braces are an engineering breakthrough in the workplace. Dump-Lok dump bed braces safely hold dump boxes at angles higher than most manufacturer body props, giving workers safe access to more areas underneath the dump bed.

  • Sold As A Pair. Intended to be used as a pair
  • Used Universally on any brand dump box
  • Equipped with high grade, high tensile steel chains to further ensure safe repairs
  • Flat Top Model for offset frame beds and trailers
  • Fits up to 5-1/2" flange

OSHA has issued citations to employers for failing to provide lockout procedures while employees were working under the dump body of dump trucks. They have recognized the hazard of unsecured dump beds and have recommended using an alternative "truck bed brace bracket".

  • Overall Height: 21"
  • Overall Width: 6"
  • Overall Length: 12.75"
  • Maximum Capacity (pair): 50,000 lbs
Emerson: Model 110 Air jack/Safety Stand 30,000 lb Capacity (Pair)

Speed of lifting combined with safety by using safety pins to raise the extensions to the lifting point, while a second safety pin is used to lock the main ram into position once the lifting action has been completed. This feature converts the jack into a safety stand. Four safety positions save valuable time and promotes operator safety.

Polyurethane is bonded to the lifting saddles for non-slip surface.

Patented, beveled piston and guide allows the ram to follow the arc of the load without binding. This feature allows smooth lifting and lowering of the load.

Quick snap detachable handles can be removed in tight working spaces, or for safety purposes.


Specs:

  • Lowest Height (w/o extension): 15-3/4"
  • High Height (w/extensions): 52"
  • Long extension (adjustable): 24"
  • Short extension: 8"
  • Ram travel: 12"
  • Safety pin positions: 4
  • Base diameter: 11-1/2"
  • Capacity (single): 15,000 lbs
  • Capacity (Pair): 30,000 lbs

  • The rate lifting capacity for a pair of Model 110s is 30,000 lbs with 200 PSI at the air source. Below are the lifting capacities at various air pressures.


  • 100psi: 15,000 lbs
  • 120psi: 18,000 lbs
  • 140psi: 21,000 lbs
  • 160psi: 24,000 lbs
  • 180psi: 27,000 lbs
  • 200psi: 30,000 lbs
  • Tiger Tool Gunite, Brunner, Bendix Slack Adjuster Puller

    Fits virtually all Gunite, Brunner, and Bendix self-adjusting slack adjusters

  • High strength ADI and steel castings
  • CNC machined, billet 4140 forcing screws
  • Grade 8 attaching hardware
  • Eliminates dangerous hammering and cutting torch methods
  • Designed for high capacity pull. can be used with 1/2" impact wrench
  • Simple to slip on for instant results

  • Loading...