Are you looking for:

18" x 18" x 48" Black Steel Underbody Truck Toolbox w/ T-Latch
  • Perfect balance of security and weather resistance with a durable 14 Ga steel body and black powder-coated finish.
  • Helps keep box contents safe and secure behind a recessed drop door and continuous hidden hinge.
  • Protect against weather and theft with locking stainless steel compression latch.
  • Can be mounted on either a flat surface or under-bed.
  • Built to last with aircraft grade cables and a replaceable gasket sealing system.
  • Made in the USA.

Protect and easily access your equipment with the Buyers Products Black Steel Underbody Truck Box with T-Latch. Available in a variety of sizes, each professional grade box is made of strong 14 Ga steel with a 12 Ga drop door that can handle the harshest job sites. Then it's powder coated black inside and out for superior corrosion resistance and style.

The continuous hidden hinge and replaceable gasket system keep weather and grime away from your tools. Aircraft grade cables help prevent damage. The locking, stainless steel compression latch provides a tight seal and deters theft.

Mount the box on any flat surface or under your truck using Buyers Products Mounting Brackets (sold separately, see "Accessories" below).

H x D x W Size: 18" x 18" x 48"

Number of Latches: 2

Emerson: Model 110 Air jack/Safety Stand 30,000 lb Capacity (Pair)

Speed of lifting combined with safety by using safety pins to raise the extensions to the lifting point, while a second safety pin is used to lock the main ram into position once the lifting action has been completed. This feature converts the jack into a safety stand. Four safety positions save valuable time and promotes operator safety.

Polyurethane is bonded to the lifting saddles for non-slip surface.

Patented, beveled piston and guide allows the ram to follow the arc of the load without binding. This feature allows smooth lifting and lowering of the load.

Quick snap detachable handles can be removed in tight working spaces, or for safety purposes.


Specs:

  • Lowest Height (w/o extension): 15-3/4"
  • High Height (w/extensions): 52"
  • Long extension (adjustable): 24"
  • Short extension: 8"
  • Ram travel: 12"
  • Safety pin positions: 4
  • Base diameter: 11-1/2"
  • Capacity (single): 15,000 lbs
  • Capacity (Pair): 30,000 lbs

  • The rate lifting capacity for a pair of Model 110s is 30,000 lbs with 200 PSI at the air source. Below are the lifting capacities at various air pressures.


  • 100psi: 15,000 lbs
  • 120psi: 18,000 lbs
  • 140psi: 21,000 lbs
  • 160psi: 24,000 lbs
  • 180psi: 27,000 lbs
  • 200psi: 30,000 lbs
  • Bendix TRDU (Trailer Remote Diagnostic Unit for Trailer ABS

    No Thumbing through manuals. No blink codes. No handhelds. No computers. No complicated instructions. Just fast and easy troubleshooting!

    The Bendix Trailer RDU simply plugs directly into the trailer's 7-pin diagnostic connector under the dash when the full tractor-trailer is connected. The green LED will flash four times to indicate communications have been established. The TRDU provides immediate system status, displaying ABS fault information using colored LED lights. The flexible Bendix Trailer RDU (TRDU) supports the complete range of Bendix ABS components, including Bendix TABS-6, A-18 (Gen 5), and MC-30 Electronic Control Units (ECUs).

    If the ABS system has no active trouble codes or faults, only the green VLT LED will remain lit to indicate that the system is receiving the proper voltage. If the ABS system has at least one active trouble code/fault, the red LEDs will light up to indicate the malfunctioning ABS component and its location on the vehicle. 

    Wesco Heavy Duty Vending Truck Auto Rewind 2 Piece Belt 72"
    • WHEEL LOCK FEATURE STANDARD: Front wheels have wheel locks to allow truck to be placed in upright position without the danger of the truck rolling away from operator. Wheel lock is activated by a conveniently located lever at top of truck.
    • In transport position load rests on (2) 10" aluminum hub moldon rubber wheels and (2) 5" poly hub moldon rubber front wheels.
    • Rear main wheel design allows truck to be tilted back to clear doorways. Especially useful with tall vending machines or other tall cargo.
    • Available in 72" and 78" heights.
    • 2 webbed cargo belts with eccentric tighteners for maximum load security.
    • Constructed of heavy duty 1" diameter steel tubing.
    • Noseplate - 9" x 24" x 1/4" thick.

    Specs

    • Capacity: 1,800 lbs
    • Ratchet Type: Auto Rewind
    • Belt Type: 2 Piece w/clasp
    • Main Wheel: 10" x 2"
    • Support Wheel: 5" x 1.5"
    • Weight: 126 lbs
    Multi-Port Fuel Injection Pressure Tester In Molded Storage Case
    Features and Benefits:
    • Can test the fuel pressure on virtually all domestic and foreign vehicles equipped with multi-port fuel injection
    • Can also test throttle body injection systems on most Chrysler and Ford vehicles
    • Bleed off valve and hose to safely de-pressurize system after completion of test
    • Comes in a durable, plastic molded storage case with carrying handle; case measures 11-1/4" x 7-1/2" x 3" and has ample space for additional adapters and parts
    • Not for diesel engines
    Includes: adapter for Domestic, Asian and European vehicles equipped with a standard Schrader test port; adapter for Ford multi-port (EFI) and throttle body systems; adapter for Honda vehicles; 4 piece adapter set: 8mm-1.00, 10mm-1.0, 12mm-1.25, and 12mm-1.50 to test most Asian and European multi-port vehicles; assorted hoses, hose barb fittings and hose clamps to test older vehicles; 2-1/2? diameter gage with dual scale – measures 100 PSI and 7 Bar and has a hang-up hook.
    Loading...