Are you looking for:

IPA Super MUTT Mobile Universal Trailer Tester - Standard Edition 9008-SE

Quickly troubleshoot lighting, air brake and ABS systems with the industry's leading trailer tester. This intuitive and durable design is ideal for both on and off-site commercial trailer testing and repairs.

Electrical Testing (12/24 Volt Operation

  • Power lights: Manually, All-On, Auto Scan, or by Remote Control
  • Audible and visual alerts: cross, open, overloaded, and short circuit indication
  • Pulsar mode allows diagnostic repair
  • Advanced trailer wiring diagnostics
  • Amperage Readout and range (0-20 amps)
  • Cable testing
  • Ground failure detection: differentiates between wire and chassis ground

ABS Testing

  • Access ABS blink codes
  • Test ABS fault blink codes via Auxiliary and Brake Circuit activation (i.e. Meritor/Wabco, Bendix TABS-6 and Haldex systems)

Air Brake Testing

  • Performs leak down test on service and emergency lines
  • Remote control allows observation of slackers to measure and adjust pushrods
  • Real time, repetitive brake activation to find developing problems and verify leaking servo cans
  • Features an internal air regulator

Remote Control

  • 12-button remote control tests all trailer electric circuitry and air brake actuation, 200+ ft. range
  • Sync multiple remotes to one unit

Includes:

  • 12-Button Remote Control
  • 5' 7-Way Cable
  • 8' Glad Hand Hoses
Kiene Wheel Wiz Hub-Piloted Wheel Puller - With Drive Axle Socket (WW2151)

The Kiene Wheel Whiz is the proven successful way to remove seized hub-piloted wheels.

The Kiene Wheel Whiz is the original hub-piloted wheel puller used for transit buses and other heavy-duty fleet applications.

  • The Wheel Whiz quickly and safely removes seized hub-piloted wheels from steering, drive and trailer axles.
  • The Wheel Whiz uses five pulling chains to remove even the most stubborn wheels safely and allow the vehicle to be returned to service quickly.
  • The Wheel Whiz works effectively on steel or aluminum wheels.
Pulling Chain Options
  • WW2101: Steel wheels with 4" and large hand holes
  • WW2102: Aluminum wheels with 1-5/8" holes
  • WW2104: Wheels with 1-1/2" holes
  • WW2105: Supersingles
  • WW2107: Ford 350 & UPS package cars
  • WW2108: Steel wheel with 2.9" diameter holes
  • WW2109: Two hole wheels with valve stem interference
Hub Socket Options
  • WW2151: Drive Axle Socket - Fits most Eaton & Meritor(Rockwell) drive axles
  • WW2152: Mini-Bus Socket - Fits most smaller hub caps on some buses
  • WW2153: Bus Steering Axle & Euclid Trailer Socket - CR1798, Stemco 343-4176 & 343-4080 and Euclid hub caps
  • WW2154: Trailer Socket - Fits most Stemco hub caps and CR1643 & CR1743
  • WW2155: Freuhauf Trailer Socket
  • WW2156: Pro Par Trailer Socket: Fits Pro Par hub caps
134A Aluminum Manifold Gauge Set with 60" Hoses and Standard Couplers

Features and Benefits:

  • Aluminum block with sight glass
  • Anti-flutter, recalibrateable gauges
  • Standard couplers
  • SAE certified 134A 60" hoses
  • Includes free 10 application dye injection system
1000 lb. (1/2 Ton) Capacity Air/Hydraulic Telescopic Transmission Jack

Features and Benefits:

  • Fully adjustable lifting saddle with four ratchet adjustment fingers that quickly adjust to the transmission pan configuration
  • Low lift height of 35” for easy transfer of transmission from jack to work bench. Maximum lift height of 75” accommodates all technicians
  • Foot activated pedal raises air cylinder's ram to maximum load in seconds. Manual pump second stage quickly raises lifting saddle to desired and precise work height
  • Convenient hand grip for pushing or pulling load when the load is in the lowered position
  • Heavy duty nylon locking strap with ratchet fingers for securing the load to the lifting saddle

Four full swivel ball bearing mounted caster wheels for easy maneuverability. Front casters can be easily locked to prevent the jack from rolling if necessary.
Required Air Pressure 100 PSI
Low Height 35"
Raised Height 75"
Saddle Forward Tilt 37°
Saddle Backward Tilt 26°
Saddle Lateral Tilt 12° left and right
Base 30-1/4" square
Shipping Weight 145 lbs.

Minimizer Floor Mats - Kenworth T600/T660/T800/W900 w/Manual & Day Cab

Please See Coverages Tab for Exact Models and Years for fit

Whether it’s the mud and snow off your booths or your morning coffee, the latest innovation from Minimizer is designed to protect the floor of your truck for years to come.

The engineers at Minimizer use cutting edge technology to scan the interior measurements and angles of each specific make and model semi cab to ensure an exact fit. A retention hook mounted to the base of the stick shift is designed to keep your floor mat in place.

  • Our tray system was designed to be removed easily for quick cleaning. In a matter of seconds you can have your Kenworth Floor Mat Model Part #100889 looking new and reinstalled so you can get your truck back on the road.
  • The textured surface will ensure your boots always get a solid grip. They will not break or crack under extreme conditions and are backed by a Lifetime Manufacturers Warranty.
  • Made out of a proprietary thermoplastic, the Kenworth Floor Mat Model Part #100889 is designed to hold up to the daily abuse of the heavy duty trucking industry.
Loading...