Are you looking for:

Diamond Tread Aluminum Topsider Truck Box Series - 18" x 16" x 96"
  • Large 12" tall door opening and the recessed door frame provide easy access to spacious storage area
  • Full-length continuous hinge on doors offers a sturdy, durable and smooth performance
  • Heavy-duty steel support legs mount directly into bed floor, not into fender
  • Contractor grade diamond bright tread aluminum box
  • Thick 3" wide rubber pad protects truck side rail
  • No drilling in side rail; J-bolts fasten under bed lip
  • Stainless steel die cast T-handle compression latch with lock for security
  • Full-weather stripping keeps moisture and dust out
  • Individually boxed for shipping
  • Two doors

  • Buyers # 1701568

    H x D x W Size: 18" x 16" x 96"

    Magnum + Balance Beads Case of 12 bags - 13 oz.
    • Timesaving, hassle-free tire balancing solution. No machines. No rebalancing.
    • Case with individually packaged bags containing the toss-in insert bag of tire balancing beads.
    • Big enough to never obstruct a valve core. No special valve core to install.
    • TPMS compatible.
    • 100% tempered glass. It cannot break, disintegrate, absorb moisture, freeze or stick together.
    • MAGNUM+ packaging as well as the beads are recyclable and eco-friendly.

    Our tire balancing beads earned their reputation over the years as a top-quality internal balancing compound that is completely safe for the tire and its components. There’s not a single balancing job that can’t be done with MAGNUM+, no matter the size or type of tire – truck, SUV/van, car and off-road tires, for summer and winter- you can trust the original internal balancing bead brand that’s been on the market for more than 25 years. Just toss the bag of beads in the tire and mount it as usual. Free of silica-based coating, recyclable and reusable. The beads will outlast your tires.

    Dynamic internal balancing will:

    • Eliminate vibrations caused by any heavy spots
    • Promote consistent tread wear and longevity of the tire
    • Improve gas mileage
    Kiene Pulling Chain For Wheel Grabber - Individual

    Replacement Chain for Wheel Grabber. Chains are sold individually.

    Chain Types & Usage:

    • Part # WW2101 - Steel wheels with 4" and larger hand holes.
    • Part # WW2102 - Aluminum wheels with 1-5/8" to 2-1/4" holes
    • Part # WW2107 - Ford 350 & UPS package cars
    • Part # WW2108 - Steel wheels with 2.9" diameter holes

    About the Wheel Grabber

    Galvanic electrolysis can literally freeze hub piloted wheels on their hub. In fact they can become so frozen to their hub that it can become a serious safety problem trying to remove them. Do any of the following techniques sound familiar: Swinging a 20 lb. sledge at the tire (hope your arms and back hold out); Placing a porta power between the frame and wheel (stand back); Loosening the lug nuts and driving the vehicle around the block (and hope the wheels don't fall off before you get back to the garage). It sounds strange, but unfortunately these are some of actual techniques that have been used.

    • Works effectively on steel or aluminum wheels, drive axle, steer axle, or trailer.
    • Great for mobile service work.

    The Pulling Chains are hooked into the hand holes and their Safety Hooks are attached to the Wheel Grabber. Next, the Hub Socket is centered on the wheel hub. An impact wrench, applied to the Forcing Screw, uniformly tightens the Pulling Chains until the seized wheel is freed - without damage to the wheel or hub! SAFE, QUICK, SIMPLE!

    5 HP 80 Gallon Vertical 2-Stage Electric Reciprocating Air Compressor

    Features and Benefits:

    • Start-Stop pressure switch control
    • ASME safety valves fully enclosed belt guard
    • Tank drain and discharge valve
    • 208-230 volt, single phase
    • 2 year full warranty

    No magnetic starter required. This compressor comes complete with everything you need to optimize your work and minimize down time. 18.5 cfm @100 PSI.

    Jump-N-Carry 12 Volt Jump Starter - 1700 Peak Amps, 425 Cranking Amps

    Features and Benefits

    • Rugged, durable and reliable 12 Volt jump starting for professional applications
    • Delivers 1700 Peak Amps, 425 cranking amps of jump starting power
    • Long, 46" #4 gauge heavy duty cables allow the unit to be positioned in the ideal location during jump starting
    • Volt gauge provides an accurate, detailed state of charge for the onboard battery
    • Built in charger will never get lost and works with any US extension cord
    • NOT compliant for California use, order SOLJNC660C instead

    Trusted by professionals the world around as their go-to jump starter, the SOLJNC660, with Clore PROFORMER battery, will not disappoint. Ideal for use in a wide variety of jump starting environments, including automotive, marine and industrial – try it once and you'll see why so many technicians will accept only the JNC660. Includes a 12 volt outlet to power accessories and a Product for Life coupon that allows the end purchaser a one-time product repair for a low, fixed fee, regardless of reason for damage/problem. 1 year limited warranty.

    Supercedes: KKJ990681

    Loading...