Are you looking for:

Mercedes-Benz and BMW Fan Clutch Service Kit

Features and Benefits:

  • Mercedes-Benz fan clutch holding wrench holds the water pump pulley to allow release of the fan
  • BMW fan clutch holding wrench holds the water pump pulley in place while loosening the radiator fan
  • Mercedes-Benz fan clutch wrench removes the thermo-viscous radiator fans found on Mercedes-Benz and Ford vehicles
  • Mercedes-Benz fan clutch wrench is used to remove or install the fan clutch assembly
  • BMW fan clutch wrench is used to remove and install the thermo-viscous fan on BMW's and Fords (32mm opening)

Mercedes-Benz Fan Clutch Holding Tool is used to remove / replace thermo-viscous fan coupling with the radiator in place. Universal fan belt adjustment wrench services Mercedes-Benz, Nissan Quest, and Mercury Villager radiator fans and pulley belts. It also can be used for loosening the A/C idler pulley  tensioner lock nuts for A/C belt adjustment or replacement Also contains 2.5 mm, 8 mm, and 10 mm Allen keys.

Jump-N-Carry 12/24 Volt Jump Starter - 3400 Peak, 850 Cranking in 12V
Features and Benefits
  • Delivers 3400 Peak Amps of jump starting power in 12 Volt mode, and 1700 Peak Amps of jump starting power in 24 Volt mode
  • Long, 46" #2 gauge cables allow convenient positioning of the unit during jump starting, while Industrial-Grade Hot Jaw clamps penetrate battery terminal corrosion and provide maximum power transfer
  • Automatic recharging using an onboard fully automatic battery charger
  • Battery status indicator gauge
  • Assembled in the USA with US and imported components
The versatility of 12 and 24 Volt jump starting in a single, heavy-duty unit. Dual Clore PROFORMER batteries power the JNC1224 to 3400 Peak Amps in 12 Volt mode. With an easy change between voltage settings using quick connects, and an onboard automatic charger, it is as convenient as it is powerful. Includes DC outlet to power 12 volt accessories and a 1 year limited warranty.

Supecedes: KKJ99058
9 Piece 1/2" Drive 6 Point Extra Thin Wall Wheel Protector Socket Set
Features and Benefits
  • Durable outer sleeve and insert protects high polished wheels and lug nuts from damage
  • Chrome-molybdenum alloy steel for long life
  • Heavy duty blow molded case
  • Fully Guaranteed
Set includes: SAE sizes 3/4" (light green), 13/16" (purple), 7/8" (green), 15/16" (brown), 1" (silver), 1-1/16" (black) and Metric sizes 17mm (blue), 19mm (yellow) and 21mm (red).
Fuel Injection Pressure Tester with Two Gages in Storage Case

Features and Benefits:

  • Test gasoline fuel pump pressure on most domestic and imported fuel injection equipped vehicles
  • Easy to hook up and read
  • Includes 2 gages for more accurate testing
  • Large gage is calibrated from 0-100 PSI (0-7.0 BAR)
  • Small gage is calibrated from 0-50 PSI (0-3.5 BAR)

Includes plastic molded storage case with carrying handle. Case measures 11-1/4" x 7-1/2" x 3" and has ample space for additional adapters and parts.

Scorpion Jack TJ12 Stationary 25,000 lb. capacity Truck Jack

The Scorpion Installed In-Ground lift is semi-recessed in your shop floor. This is a semi-inground installation is an ideal solution for those shops that perform a lot of tire service and Brake Service. This is an installed version of the ScorpionTJ12 service jack and it offers a perfect combination of speed, efficiency, ease of use and value. The Scorpion Installed lifts are much less expensive than your standard above- ground options or for that matter the in-ground options too.


These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi). So you lift the whole front end or axle assembly in one go. There is a tire spotting dish for quick set up, and a remote control to allow the operator to check the load.


There is a built in lock for safety and other convenience features.


The lifts come with a control station housing the pump unit and a 20 Ft. Remote control so the operator can spot the load.


Features:

  • 25,000 Lb capacity
  • Dual hydraulic rams for lifting
  • Lift over 20" with a built in safety lock
  • Lift across the axle with the lifting saddles or lift on the frame
  • Heavy-duty hydraulics and air motor

  • Choose between:

  • Above Ground install - 8" Driver Over Height
  • Semi In-Ground install - 4.25" Drive Over Height
  • In-Ground Install - Flush mount with 0" Driver Over Height
  • Loading...