Features and Benefits
A great balance of power and portability, the SOLJNC300XL packs the punch of 900 Peak Amps of starting power into a unit that weighs just 9 lbs. This store-anywhere, use-anywhere unit features Clore Proformer battery technology, specifically designed for vehicle jump starting. The SOLJNC300XL also features a high intensity work light, 56" cable span, full size insulated clamps and our convenient Grip-Lock™ clamp storage system. Also features LED battery status indicator, recessed control panel. Includes wall charger and 1 year limited warranty.
Supercedes: KKJJNC300XL
Features and Benefits:
Calibrated to measure 17 different refrigerants (R12, R22, R123, R124, R134a, R401A, R401B, R402A, R402B, R404A, R407C, R408A, R409A, R410A, R502, R507, R508B) these accurate gauges allow you to choose the temperature (°F or °C) and pressure units (PSI, bar, kPa and kg/cm3) your most comfortable using. The low side gauge has a pressure scale of 30 inHg VAC to 250 psig and the high side gauge has a pressure scale of 0 to 800 psig. Gauges come with a backlight to enhance the view and make the gauges easy to see in low light conditions.Automatic shutdown after 15 minutes of inactivity. Low battery indicator.
Dump-Lok dump bed braces are an engineering breakthrough in the workplace. Dump-Lok dump bed braces safely hold dump boxes at angles higher than most manufacturer body props, giving workers safe access to more areas underneath the dump bed.
OSHA has issued citations to employers for failing to provide lockout procedures while employees were working under the dump body of dump trucks. They have recognized the hazard of unsecured dump beds and have recommended using an alternative "truck bed brace bracket".
The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.
This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.
The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.
Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.
*Note: This is the adapter bar only. Steps are sold separately.
Features and Benefits:
Four full swivel ball bearing mounted caster wheels for easy maneuverability. Front casters can be easily locked to prevent the jack from rolling if necessary.
Required Air Pressure 100 PSI
Low Height 35"
Raised Height 75"
Saddle Forward Tilt 37°
Saddle Backward Tilt 26°
Saddle Lateral Tilt 12° left and right
Base 30-1/4" square
Shipping Weight 145 lbs.