Are you looking for:

Scorpion Jack TJ12 Stationary 25,000 lb. capacity Truck Jack

The Scorpion Installed In-Ground lift is semi-recessed in your shop floor. This is a semi-inground installation is an ideal solution for those shops that perform a lot of tire service and Brake Service. This is an installed version of the ScorpionTJ12 service jack and it offers a perfect combination of speed, efficiency, ease of use and value. The Scorpion Installed lifts are much less expensive than your standard above- ground options or for that matter the in-ground options too.


These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi). So you lift the whole front end or axle assembly in one go. There is a tire spotting dish for quick set up, and a remote control to allow the operator to check the load.


There is a built in lock for safety and other convenience features.


The lifts come with a control station housing the pump unit and a 20 Ft. Remote control so the operator can spot the load.


Features:

  • 25,000 Lb capacity
  • Dual hydraulic rams for lifting
  • Lift over 20" with a built in safety lock
  • Lift across the axle with the lifting saddles or lift on the frame
  • Heavy-duty hydraulics and air motor

  • Choose between:

  • Above Ground install - 8" Driver Over Height
  • Semi In-Ground install - 4.25" Drive Over Height
  • In-Ground Install - Flush mount with 0" Driver Over Height
  • Emerson Model 220 Air Jack/Safety Stand 48,000 lb Capacity (Pair)

    Includes: both long and short extentions, polyurethane bonded saddle & 2 safety pins


    Features:

  • 48,000 LB capacity per pair
  • 4 ton more lifting power than other brands
  • Polyurethane bonded to lifting saddles for increased safety against slipping
  • Patented, beveled piston & guide allows the ram to follow the arc of the load, giving a smoother, safer lifting and lowering action
  • Quick snap detachable handles
  • Coated cylinder inhibits rust & corrosion for longer life
  • Double air valve setup to run both jacks simultaneously is included

  • Specs:

  • Height Lowest (w/o extensions): 16"
  • Height High (w/ extensions): 54"
  • Height Long Extension (adjustable): 24"
  • Short Extension: 6
  • Ram Travel: 10"
  • Safety Pin positions: 3
  • Base Diameter: 15"
  • Capacity (single): 12 tons
  • Capacity (pair): 24 tons
  • 5 HP 80 Gallon Vertical 2-Stage Electric Reciprocating Air Compressor

    Features and Benefits:

    • Start-Stop pressure switch control
    • ASME safety valves fully enclosed belt guard
    • Tank drain and discharge valve
    • 208-230 volt, single phase
    • 2 year full warranty

    No magnetic starter required. This compressor comes complete with everything you need to optimize your work and minimize down time. 18.5 cfm @100 PSI.

    Jump-N-Carry 12 Volt Jump Starter - 1700 Peak Amps, 425 Cranking Amps

    Features and Benefits

    • Rugged, durable and reliable 12 Volt jump starting for professional applications
    • Delivers 1700 Peak Amps, 425 cranking amps of jump starting power
    • Long, 46" #4 gauge heavy duty cables allow the unit to be positioned in the ideal location during jump starting
    • Volt gauge provides an accurate, detailed state of charge for the onboard battery
    • Built in charger will never get lost and works with any US extension cord
    • NOT compliant for California use, order SOLJNC660C instead

    Trusted by professionals the world around as their go-to jump starter, the SOLJNC660, with Clore PROFORMER battery, will not disappoint. Ideal for use in a wide variety of jump starting environments, including automotive, marine and industrial – try it once and you'll see why so many technicians will accept only the JNC660. Includes a 12 volt outlet to power accessories and a Product for Life coupon that allows the end purchaser a one-time product repair for a low, fixed fee, regardless of reason for damage/problem. 1 year limited warranty.

    Supercedes: KKJ990681

    Bead Breaker Kit, "Combi" [contains 10101, 10590, and 10604 Hose]
    Works on single, two and three-piece truck tires/rims, including some new style wheels. Breaks beads in seconds using 10,000 lbs. of force. The “Combi” Bead Breaker will not work on five-piece earth mover giant wheel/rim. Model 10100 or 10105 required. Similar to IMT-210 but has patented side straps which allow tool to be used on newer high flanged wheels. The kit includes bead breaker and ESCO Model Numbers: 10590 - Pump, Air Hydraulic, 2 1/2 Quart 10604 - Hose Assembly with Hose Coupler, 8'
    Loading...